Service Manual

Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When proxy-gateway static conguration is added, the setting is saved in the Layer 2 module. When you
remove the static proxy gateway conguration, each proxy-gateway static mac congured is deleted
from the Layer 2 module.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
remote-mac-address exclude-vlan
Congure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
S3048–ON
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters
remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the remote VLT Domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are
excluded from doing proxy gateway. The value can be a single VLAN ID or comma -
separated, VLAN IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can congure the MAC address, of a VLT peer in remote VLT Domain, to be associated with the static
VLT proxy gateway and exclude a VLAN or a range of VLANs from proxy routing..
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
1492
VLT Proxy Gateway