Service Manual

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage Information
If the maximum route limit is not specied for a VRF, then it has unlimited space that extends to the
maximum number of entries allowed for the system. This command is not applicable to the default and
management VRFs.
show ip vrf
Displays information corresponding to the VRFs that are congured in the system.
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to display information
corresponding to that VRF..
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
show ip vrf
VRF-Name VRF-ID Interfaces
default 0 Gi 1/1-13,18-47,
Te 1/49,50,51,52,
Ma 1/1,
Ma 2/1,
Ma 3/1,
Ma 4/1,
Ma 5/1,
Ma 6/1,
Nu 0,
Vl 1
test1 1 Gi 1/14,16-17
test2 2 Gi 1/15
Virtual Routing and Forwarding (VRF)
1489