Service Manual

Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : Present
Boot Selector : 3.20.0.0
Memory Size : 3203911680 bytes
Temperature : 0C
Voltage : ok
Serial Number : NA
Part Number : <PART NUMB Rev R>
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : <SER:)0
PPID Revision : R>
Service Tag : N/A
Expr Svc Code : 0
Auto Reboot : disabled
Burned In MAC : 00:00:00:00:00:00
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
---------------------------------------------------------------------------
1 1 up AC up 18528
1 2 absent absent 0
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed Fan2 Speed
------------------------------------------------------------------------------------
1 1 up up 19275 up 19275
1 2 absent
1 3 up up 19275 up 18904
Speed in RPM
Related Commands
• show version – displays the Dell Networking OS version.
• show hardware stack-unit – displays the data plane and management plane input and output statistics of a particular
stack member.
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to perform
troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for
the stack member designated by unit-id. The unit ID range is from 1to 6.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
When using the pipe command ( | ), enter one of these keywords to lter
command output. For details about ltering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
Control and Monitoring
143