Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1391

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-

Mux (PMUX) mode only.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

Usage Information This command displays internal software driver information, which may be useful during troubleshooting

switch initialization errors, such as a downed Port-Pipe.

terminal monitor

Congure the Dell Networking OS to display messages on the monitor/terminal.

Syntax