Service Manual

Version Description
E-Series legacy
command
Related Commands show logging — displays logging settings and system messages in the internal buer.
clear logging auditlog
Clears audit log.
Syntax
clear logging auditlog
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Example
Dell(conf)#clear logging auditlog
Related Commands show logging auditlog — displays audit log
default logging buered
Return to the default setting for messages logged to the internal buer.
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1380
Simple Network Management Protocol (SNMP) and Syslog