Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1371

Related Commands show running-cong snmp — displays the SNMP running conguration.

snmp-server vrf

Congures an SNMP agent to bind to a specic VRF.

Syntax

snmp-server vrf vrf-name

To undo the SNMP agent conguration, use the no snmp-server vrf vrf-name command.

Parameters

vrf vrf-name Enter the keyword vrf and then the name of the VRF to associate an SNMP

agent with that VRF.

Defaults Not Enabled.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4(0.0) Introduced on the S-Series and Z9000.

Usage Information

Use this command to bind an SNMP agent to a VRF. The SNMP agent processes the requests from the

interfaces that belong to the specied VRF. If no VRF is specied, then the default VRF is used.

Related Commands show snmp user — displays the information congured on each SNMP user name.

snmp trap link-status

Enable the interface to send SNMP link traps, which indicate whether the interface is up or down.

Syntax

snmp trap link-status

To disable sending link trap messages, use the no snmp trap link-status command.

Defaults Enabled.

Command Modes INTERFACE