Service Manual

• If no response is received within a dened period of time, the SWP timeout mechanism resubmits the
message at the head of the FIFO queue.
• After retrying a dened number of times, the SWP-2-NOMORETIMEOUT timeout message is generated.
• In the S-Series example, a retry (Retries) value of zero indicates that the SWP mechanism reached the
maximum number of retransmissions without an acknowledgement.
Example (S-Series)
Dell#show processes ipc flow-control ?
cp Control Processor
| Pipe through a command
show processes memory
Display memory usage information based on processes running in the S-Series or Z-Series system.
Syntax
show processes memory {management-unit | stack unit {unit-id | all |
summary}}
Parameters
management-unit Enter the keyword management-unit for CPU memory usage of the stack
management unit.
stack unit unit id Enter the keyword stack unit then a stack unit ID of the member unit for
which to display memory usage on the forwarding processor.
all Enter the keyword all for detailed memory usage on all stack members.
summary Enter the keyword summary for a brief summary of memory availability and usage
on all stack members.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.7.1.0 Added the management-unit option.
7.6.1.0 Introduced on the S-Series.
136
Control and Monitoring