Service Manual

0x000001ac 25750 2575 10000 2.78% 2.48% 3.40%
0 sysdlp
0x0000019a 10650 1065 10000 0.60% 1.16% 2.50%
0 sysd
0x000003a5 860 86 10000 0.40% 0.22% 0.28%
0 clish
0x000001ad 520 52 10000 0.20% 0.30% 0.16%
0 lacp
0x000004ba 330 33 10000 0.20% 0.36% 0.09%
0 clish
0x000000c9 1240 124 10000 0.20% 0.15% 0.44%
0 nvmgr
0x000000e0 530 53 10000 0.20% 0.12% 0.16%
0 igmp
0x00000132 420 42 10000 0.20% 0.10% 0.13%
0 vrrp
0x0000028d 410 41 10000 0.20% 0.05% 0.12%
0 ovsdbsvr
0x000000a9 200 20 10000 0.20% 0.03% 0.06%
0 arpm
0x00000253 100 10 10000 0.20% 0.02% 0.02%
0 otm
0x00000206 140 14 10000 0.20% 0.02% 0.03%
0 tnlmgr
0x00000012 1290 129 10000 0.00% 0.10% 0.12%
0 mount_mfs
0x0000024d 400 40 10000 0.00% 0.08% 0.14%
0 xstp
Related Commands
show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack member
port-pipe.
show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
show hardware system-ow — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
show interfaces stack-unit — displays information on all interfaces on a specic S-Series stack member.
show processes memory (S-Series) — displays CPU usage information based on processes running in an S-
Series.
show processes ipc ow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ
statistics.
Defaults none
134
Control and Monitoring