Service Manual

Version Description
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information With password authentication enabled, you can authenticate using the local, RADIUS, or TACACS+
password fallback order as congured.
ip ssh pub-key-le
Specify the le used for host-based authentication.
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD Enter the le name for the host-based authentication.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
This command species the le used for the host-based authentication. The creates/ le overwrites the
flash://ADMIN_DIR/ssh/knownhosts le and deletes the user-specied le. Even though this
command is a global conguration command, it does not appear in the running conguration because you
only need to run this command once.
The le contains the OpenSSH-compatible public keys of the host for which host-based authentication is
allowed. An example known host le format:
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui
+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3t ReG1o8AxLi6+S4hyEMqHzkzBFNVqHzpQc
+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEn WIMPJi0ds= ashwani@poclab4
NOTE: For rhostfile and pub-key-file, the administrator must FTP the le to the chassis.
1314
Security