Service Manual

aaa authentication login
Congure AAA Authentication method lists for user access to EXEC mode (Enable log-in).
Syntax
aaa authentication login {method-list-name | default} method [... method4]
To return to the default setting, use the no aaa authentication login {method-list-name |
default} command.
Parameters
method-list-name Enter a text string (up to 16 characters long) as the name of a user-congured
method list that can be applied to dierent lines.
default Enter the keyword default to specify that the method list specied is the default
method for all terminal lines.
method Enter one of the following methods:
• enable: use the password the enable password command denes in
CONFIGURATION mode. Not available if role-only is in use.
• line: use the password the password command denes in LINE mode. Not
available if role-only is in use.
•
local: use the password for the userid contained in the local password
database.
• none: no authentication. Not available if role-only is in use.
• radius: use the RADIUS servers congured with the radius-server
host command.
• tacacs+: use the TACACS+ servers congured with the tacacs-server
host command.
... method4 (OPTIONAL) Enter up to four additional methods. In the event of a “no response”
from the rst method, the system applies the next congured method (up to four
congured methods).
Defaults Not congured (that is, no authentication is performed).
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Added support for roles on the Z9000, S6000, S4820T, S4810, MXL
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Security
1267