Service Manual
rmon collection statistics
Enable RMON MIB statistics collection on an interface.
S3048–ON
Syntax
rmon collection statistics {controlEntry integer} [owner name]
To remove RMON MIB statistics collection on an interface, use the no rmon collection
statistics {controlEntry integer} command.
Parameters
controlEntry integer Enter the keyword controlEntry to specify the RMON group of statistics using
a value. Then enter an integer value from 1 to 65535 that identies the RMON
Statistic Table. The integer value must be a unique in the RMON statistic table.
owner name (OPTIONAL) Enter the keyword owner then the owner name to record the owner
of the RMON group of statistics.
Defaults none
Command Modes CONFIGURATION INTERFACE (cong-if)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
S3048–ON
Syntax
rmon event number [log] [trap community] [description string]
To disable RMON on an interface, use the no rmon event number command.
1228
Remote Monitoring (RMON)