Service Manual

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

pre- 6.2.1.1 Introduced on the E-Series.

Related Commands ip poison-reverse — sets the prex for RIP routing updates.

maximum-paths

Set RIP to forward packets over multiple paths.

S3048–ON

Syntax

maximum-paths number

To return to the default values, use the no maximum-paths commands.

Parameters

number Enter the number of paths. The range is from 1 to 16. The default is 4 paths.

Defaults 4

Command Modes ROUTER RIP

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.