Service Manual
Version Description
pre- 6.2.1.1 Introduced on the E-Series.
Related Commands ip prex-list — enters PREFIX-LIST mode and congures a prex list.
ip poison-reverse
Set the prex of the RIP routing updates to the RIP innity value.
S3048–ON
Syntax
ip poison-reverse
To disable poison reverse, use the no ip poison-reverse command.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Related Commands ip split-horizon — sets the RIP routing updates to exclude routing prexes.
ip rip receive version
To receive specic versions of RIP, set the interface. The RIP version you set on the interface overrides the version command in
ROUTER RIP mode.
S3048–ON
Syntax
ip rip receive version [1] [2]
Routing Information Protocol (RIP)
1207