Service Manual

qos-policy-input
Create a QoS input policy on the router.
S3048–ON
Syntax
qos-policy-input qos-policy-name cpu-qos | layer2
To remove an existing input QoS policy from the router, use the no qos-policy-input qos-policy-
name cpu-qos | layer2 command.
Parameters
qos-policy-name Enter the name for the policy map in character format (32 characters maximum).
cpu-qos (OPTIONAL) Enter the keyword cpu-qos keyword to assign this ACL to control
plane trac only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information
Use this command to specify the name of the input QoS policy. Once input policy is specied, rate-police
can be dened. This command enables the qos-policy-input conguration mode— (conf-qos-policy-in).
When changing a Service-Queue conguration in a QoS policy map, all QoS rules are deleted and re-added
automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value
shown in the show qos statistics command is reset.
Related Commands rate police — incoming trac policing function.
qos-policy-output
Create a QoS output policy.
S3048–ON
Syntax
qos-policy-output qos-policy-name
Quality of Service (QoS)
1171