Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1161

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Usage Information If the rate shape exists in both aggregate and per-queue qos-policy, minimum of 2 take eect. Some of all

Queue-rate will not exceed aggregate.

Related Commands

policy-map-input — creates an input policy map.

policy-map-output — creates an output policy map.

policy-map-input

Create an input policy map.

S3048–ON

Syntax

policy-map-input policy-map-name cpu-qos | [layer2]

To remove an input policy map, use the no policy-map-input policy-map-name cpu-qos |

[layer2] command.

Parameters

policy-map-name Enter the name of the policy map in character format (32 characters

maximum).

cpu-qos Enter the cpu-qos keyword to assign this ACL to control plane trac only.

layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The

default is Layer 3.

Defaults Layer 3

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.