Service Manual

Lines Beginning
With or
Including
Description
Sending Ver:3 Sending OSPF3 version..
type: Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
• 7 - external LSA
• 8 - link-state advertisement (OSPFv3)
• 9 - link local LSA (OSPFv2), Intra-Area-Prex LSA (OSPFv3)
• 11 - grace LSA (OSPFv3)
Length: Displays the packet length.
Router ID: Displays the OSPF3 router ID.
Area ID: Displays the Area ID.
Chksum: Displays the OSPF3 checksum.
default-information originate
Congure the Dell Networking OS to generate a default external route into an OSPFv3 routing domain.
Syntax
default-information originate [always] [metric metric-value] [metric-type
type-value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information
must always be advertised.
metric metric-value (OPTIONAL) Enter the keyword metric then a number to congure a metric
value for the route. The range is from 1 to 16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type
of 1 or 2 for default routes. The values are:
• 1 = Type 1 external route
• 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Open Shortest Path First (OSPFv2 and OSPFv3)
1061