Service Manual

Version Description
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added the keyword default.
pre- 6.1.1.1 Introduced on the E-Series.
redistribute isis
Redistribute IS-IS routing information throughout the OSPF instance.
S3048–ON
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-
value | metric-type type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value | metric-type type-value] [route-map map-
name] [tag tag-value] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1
routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1
and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2
routes.
metric metric-value (OPTIONAL) Enter the keyword metric then a number. The range is from 0
(zero) to 4294967295.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPF. The range is from 0 to 4294967295.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
Open Shortest Path First (OSPFv2 and OSPFv3)
1019