Service Manual

Conguring source interface for ftp communications.
ip http vrf
Congures an HTTP client with a VRF that is used to connect to the HTTP server.
Syntax
ip http vrf {management | vrf-name}
To undo the HTTP client conguration, use the ip http vrf command.
Parameters
management Enter the keyword management for conguring the management VRF that uses
an HTTP client.
vrf-name Enter the name of the VRF for conguring a nondefault that uses an HTTP client.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S3048-ON, S4048-ON, S6000–
ON, and Z9500.
Usage Information To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP client uses the VRF
name that you specify to reach the HTTP server. If you do not specify a VRF name, then the HTTP client
uses the default VRF.
ip ftp password
Specify a password for outgoing FTP connections.
Syntax
ip ftp password [encryption-type] password
To remove a password and return to the default setting, use the no ip ftp password [password]
command.
Parameters
encryption-type (OPTIONAL) Enter one of the following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
100
Control and Monitoring