Deployment Guide

38 Dell EMC Solutions for Microsoft Azure Stack HCI Networking Guide
9.2 Ensure DCB is disabled on Intel X710 adapters
DCB, if used, is only configured on the QLogic or Mellanox adapters for this deployment. Dell EMC
recommends disabling DCB on the Intel X710 adapters.
On each of the Ready Nodes, ensure Data Center Bridging is disabled for both Intel X710 network adapter
ports as follows:
1. In Windows Server, go to Device Manager > Network Adapters.
2. Double click on the first Intel Ethernet 10G X710 port to open the Properties dialog box.
3. Click on the Data Center tab and ensure Options is set to Disabled as shown in Figure 23.
DCB disabled on X710 network adapter port
4. Repeat steps 2-3 for the second Intel Ethernet 10G X710 port.