Deployment Guide

19 Dell EMC Solutions for Microsoft Azure Stack HCI Networking Guide
5.3 Verify Mellanox ConnectX-4 Lx adapter settings
This section verifies the Mellanox ConnectX-4 Lx adapters are configured properly.
Note: The settings shown in this section are factory defaults. This section may be skipped if the Mellanox
ConnectX-4 Lx adapters are known to be at their factory default settings. There are no RDMA or DCB settings
in System Setup for this adapter.
If the system is already in System Setup from Section 5.1, skip to step 4.
1. Connect to the server's iDRAC in a web browser and launch the virtual console.
2. In the virtual console, from the Next Boot menu, select BIOS Setup.
3. Reboot the server.
4. On the System Setup Main Menu page, select Device Settings.
5. Click on the first Mellanox ConnectX-4 adapter port to launch the Main Configuration Page for the
port.
Mellanox adapter Port 1 highlighted
6. On the Main Configuration Page, click NIC Configuration.
NIC Configuration highlighted