Specifications

N3200-ON Series Warnings and Specifications
This document lists Warnings, Regulatory information, and Specifications for the Dell EMC PowerSwitch N3200-ON Series switch.
Table 1. Document revision history
Revision Date Description
A00 2020-03 Initial release.
Support and documentation
For installation instructions, see the Dell EMC PowerSwitch N3200-ON Series Installation Guide at www.dell.com/support/.
To access the support site, go to www.dell.com/support/. To display information in your language, at the bottom of the page, select
your country from the drop-down menu.
Information icon definitions:
WARNING:
The Warning icon signals information about hardware handling that could result in injury.
CAUTION: The Caution icon signals information about situations that could result in equipment damage or loss of data.
NOTE: The Note icon signals important operational information.
Warnings
WARNING:
To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING: Only trained and qualified personnel can install this equipment. Read the safety instructions in your
Safety,
Environmental, and Regulatory
.
WARNING: This switch has multiple power cables. Disconnect all power cables before servicing.
WARNING: This switch has optical transceivers, which comply with the limits of Class 1 laser radiation. When working
with optical fibers, follow all warning labels and always wear eye protection.
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the
optical transceiver ports. Avoid exposure to laser radiation; do not stare into open apertures.
WARNING: Never power on the switch if no fan module is installed. (Fixed-fan switches always have a fan module
installed.)
WARNING: Prevent exposure and contact with hazardous voltages. Do not attempt to operate this switch with the
safety cover removed. To comply with the GR-1089 Lightning Criteria for Equipment Interfacing with AC or DC Power
Ports, use an external surge protection device (SPD) at the AC or DC input of the router.
WARNING: Equipment that provides DC input to the DC port must be certified for CCC and meet the relevant
standards.
WARNING: This equipment must be earthed. Connect the power plug to a properly wired earth-ground socket outlet.
1
N3200-ON Series Warnings and Specifications 3