Install Guide
Table Of Contents
- Dell EMC PowerSwitch N3200-ON Series Installation Guide
- Contents
- About this guide
- N3200-ON Series switch
- Site preparations
- N3200-ON Series switch installation
- Unpack
- Rack or cabinet hardware installation
- Ground cable
- Desktop
- N3208PX-ON ceiling-mount switch installation
- N3208PX-ON wall-mount switch installation
- Standard bracket two-post installation
- Two-post five-inch-offset switch installation
- Two-post flush-mount switch installation
- Wall- or ceiling-mount switch installation
- One RU ReadyRails installation
- Optics installation
- Switch start-up
- After switch placement
- Switch replacement
- External power adapter
- Power adapter holder assembly
- Wall or ceiling installation
- DIN rail installation
- Single-EPA and switch four-post installation
- Single-EPA and switch two-post center-mount installation
- Single-EPA and switch two-post front-mount installation
- Dual-EPAs two-post front-mount installation
- Dual-EPAs two-post center-mount installation
- Power supply
- Fans
- Management ports
- Installation using ONIE
- Specifications
- Dell EMC support
Korean certification of compliance
Figure 9. Korean certification of compliance
Figure 10. Korean package label
Safety standards and compliance agency
certifications
● CUS UL 60950-1, 2nd Edition
○ Meets or exceeds Hi Pot and Ground Continuity testing per UL 60950-1.
● CSA 60950-1-03, 2nd Edition
● EN 60950-1, 2nd Edition
● EN 60825-1, 1st Edition
● EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification Requirements and User’s Guide
● EN 60825-2 Safety of Laser Products—Part 2: Safety of Optical Fibre Communication Systems
● FDA Regulation 21CFR 1040.10 and 1040.11
● IEC 60950-1, 2nd Ed, including all National Deviations and Group Differences
● IEC 62368-1
Electromagnetic compatibility
Emissions
● International: CISPR32: Class A
● Australia/New Zealand: AS/NZS CISPR 32: Class A
Specifications
85