Users Guide

Switch Management Commands 2319

• show interfaces transceiver properties

Syntax

• bgp — Show detailed information specific to BGP.

• bgp-ipv6 — Show detailed information specific to BGP IPv6.

• ospf — Show detailed information specific to OSPF.

• ospfv3 — Show detailed information specific to OSPFv3.

• bfd — Show detailed information specific to BFD.

• file — Write the output to a file in the local flash instead of the console.

• usb — Write the output to a file on the USB drive instead of the

console. A USB storage device must be inserted into the front panel USB

port.

Command Mode

Privileged Exec mode, Global Configuration mode and all Configuration

submodes

User Guidelines

The output of the show tech-support command combines the output of the

following commands at a minimum:

• show interfaces transceiver

• show power inline

• show switch stack-port counters

• show nsf

• show slot

• show interfaces advertise

• show interfaces advanced firmware

• show lldp remote-device all

• show interfaces counters errors

• show fiber-ports optical-transceiver

• show process cpu