Users Guide

Switch Management Commands 2067
History:....................................... 10
SSH configuration:
Remote Connection Login Timeout(mins)(secs).... 10 minutes 0 seconds
History:....................................... 10
speed
Use the speed command in Line Configuration mode to set the line BAUD
rate. Use the no form of the command to restore the default settings.
Syntax
speed {bps}
no speed
• bps — BAUD rate in bits per second (bps). The options are 2400, 9600,
19200, 38400, 57600, and 115200.
Default Configuration
This default speed is 9600 for all platforms other than the N1100-ON/N2100-
ON/N2200-ON/N3100-ON/N3200-ON Series switches. The N1100-
ON/N2100-ON/N2200-ON/N3100-ON/N3200-ON Series switches default to
115200 BAUD.
Command Mode
Line Interface (console) mode
User Guidelines
This configuration applies only to the current session.
Example
The following example configures the console BAUD rate to 9600.
console(config-line)#speed 9600