White Papers

12 Using Policy Based Routing and Access Control Lists in a Virtualized Network
Use the following commands in creating Figure 2…
1G Routing interface configuration…
console#config
console(config)#vlan 10
console(config-vlan10)#exit
console(config)#interface vlan 10
console(config-if-vlan10)#ip address 192.151.3.5 255.255.255.0
console(config-if-vlan10)#exit
console(config)#interface gi1/0/1
console(config-if-Gi1/0/1)#switchport trunk allowed vlan 10
console(config-if-Gi1/0/1)#switchport mode trunk
console(config-if-Gi1/0/1)#exit
10G Routing interface configuration…
console(config)#vlan 20
console(config-vlan20)#exit
console(config)#interface vlan 20
console(config-if-vlan20)#ip address 192.150.2.5 255.255.255.0
console(config-if-vlan20)#exit
console(config)#interface te/1/0/2
console(config-if-Te1/0/2)#switchport trunk allowed vlan 20
console(config-if-Te1/0/2)#switchport mode trunk
console(config-if-Te1/0/2)#exit
Server Interface configuration…
console(config)#vlan 30
console(config-vlan30)#exit
console(config)#interface vlan 30
console(config-if-vlan30)#ip address 192.149.1.1 255.255.255.0
console(config-if-vlan30)#exit
console(config)#interface te1/0/1
console(config-if-Te1/0/1)#switchport access vlan 30
console(config-if-Te1/0/1)#switchport mode access
console(config-if-Te1/0/1)#exit
Add the following commands to implement the Policy Based Route…
Create a time-range…
console(config)#time-range db-backup
console(config-time-range)#periodic thursday 1:00 to 5:00
console(config-time-range)#exit
Configure an ACL with IP address, time-range and priority…
console(Config)#ip access-list db-backup-cos
console(config-ip-acl)#permit ip 192.16.44.2 0.0.0.0 any time-range db-backup
assign-queue 6
console(config-ip-acl)#exit