Users Guide

Hardware Overview 183
Dell EMC Networking N3200-ON Series Switch
Hardware
This section contains information about device characteristics and modular
hardware configurations for the Dell EMC Networking N3200-ON Series
switches.
N3200-ON Series Front Panel
All N3200-ON models, except the N3208PX-ON, are 1U rack-mountable
switches. A kit to rack mount the N3208PX-ON is available separately. All
N3200-ON switch models support:
• RJ-45 and Type-B micro USB 3.0 console ports (115200–8–N–1)
• Reset button
• Port and system LEDs
• Stack Master LED and Stack Number Display (not present on N3208PX-
ON)
• Type-A USB 3.0 port for storage
• Out-of-band Ethernet interface
Figure 3-30. Dell EMC Networking N3248 Switch (Front Panel)
N3200-ON Series Rear Panel
On all N3200-ON models, except the N3208PX-ON, there are 2x50G
QSFP28 stacking ports in the rear. The stacking ports do not support QSFP
transceivers. Inserting a QSFP transceiver may damage the switch. The
stacking ports may be configured as a pair of Ethernet ports. In Ethernet
mode, each stacking port supports 4x25G, 2x50G, or 1x100G lane
configuration. Each lane is mapped to a suitably-named Ethernet interface.
Unmapped interfaces show their status as detached. A suitable breakout cable
is required.