CLI Guide

Layer 2 Switching Commands 877
Syntax
show vlan association mac [mac-address]
• mac-address — Specifies the MAC address to be entered in the list.
(Range: Any valid MAC address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
• MAC Address—The configured MAC address
• VLAN —The associated VLAN identifier
Example
The following example shows no entry in MAC address to VLAN cross-
reference.
console#show vlan association mac
MAC Address VLAN ID
----------------------- -------
0001.0001.0001.0001 1
show vlan association subnet
Use the show vlan association subnet command to display the VLAN
associated with a specific configured IP-Address and netmask. If no IP
Address and net mask are specified, the VLAN associations of all the
configured IP-subnets are displayed.
Syntax
show vlan association subnet [ip-address ip-mask]
• ip-address — Specifies IP address to be shown
• ip-mask — Specifies IP mask to be shown