CLI Guide

Layer 2 Switching Commands 601
iscsi enable
The iscsi enable command globally enables iSCSI optimization. To disable
iSCSI optimization, use the no form of this command.
Syntax
iscsi enable
no iscsi enable
Default Configuration
iSCSI is enabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command modifies the running config to enable flow control on all
interfaces.
Monitoring for EqualLogic Storage arrays via LLDP is enabled by this
command. Upon detection of an EQL array, the specific interface involved
will have spanning-tree portfast enabled and unicast storm control disabled.
These changes appear in the running config. Disabling iSCSI Optimization
does not disable flow control, portfast or storm control configuration applied
as a result of enabling iSCSI Optimization.
Command History
Modified in version 6.5 firmware.
Example
In the following example, iSCSI is globally enabled.
console(config)#iscsi enable
show iscsi
Use the show iscsi command to display the iSCSI configuration.