CLI Guide

Layer 2 Switching Commands 422
Gi2/0/2
Port Description
----- ----------------------------------------------------------------------
Po1
show interfaces detail
Use the show interfaces detail command to display detailed status and
configuration of the specified interface.
Syntax
show interfaces detail interface-id
• interface-id— An Ethernet interface identifier or port channel identifier.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays detailed status and configuration of the
specified interface.
console#show interfaces detail gi1/0/1
Port Description Duplex Speed Neg MTU Admin Link
State State
--------- --------------------------- ------ ------- ---- ----- ----- -----
Gi1/0/1 N/A Unknown Auto 1518 Up Down
Port Description
--------- ------------------------------------------------------------------
----
Gi1/0/1
Flow Control: Enabled
Port: Gi1/0/1