CLI Guide

Switch Management Commands 2105
Examples
console(config)# power inline usage-threshold 90
Command History
Syntax updated in 6.4 release.
clear power inline statistics
Use this command to clear the PoE statistics.
Syntax
clear power inline statistics [interface-id]
• interface-id—An Ethernet interface capable of supplying PoE power.
Default Configuration
This command has no default configuration.
Command Modes
Privileged Exec
User Guidelines
If no interface is specified, the statistics are cleared for all PoE-capable
interfaces.
show power inline
Use the show power inline command to report current PoE configuration and
status. If no port is specified, the command displays global configuration and
status of all the ports. If a port is specified, then the command displays the
details for the single port. Use the detailed parameter to show power limits,
detection type and high power mode for the interface.
Syntax
show power inline [interface-id] [detailed]
• interface-id—Any PoE-capable Ethernet interface. See Interface Naming
Conventions for interface representation.