Users Guide

Switch Management Commands 2031
• ip-address—Clear a specific address conflict.
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
console#clear ip dhcp conflict *
client-identifier
Use the client-identifier command in DHCP Pool Configuration mode to
identify a Microsoft DHCP client to be manually assigned an address. Use the
no form of the command to remove the client identifier configuration.
Syntax
client-identifier unique-identifier
no client-identifier
•
unique-identifier —The identifier of the Microsoft DHCP client. The
client identifier is specified as 7 bytes of the form
XX:XX:XX:XX:XX:XX:XX where X is a hexadecimal digit.
Default Configuration
This command has no default configuration.
Command Mode
DHCP Pool Configuration mode