Users Guide

Layer 3 Routing Commands 1588
Syntax
show ipv6 mld interface { vlan vlan-id | all}
• vlan-id — A valid VLAN id.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following information is displayed for the specified interface:
Field Description
Interface The interface number in unit/slot/port format.
MLD Global
Admin Mode
This field displays the configured global administrative status of
MLD.
MLD Interface
Admin Mode
This field displays the configured interface administrative status
of MLD.
MLD Operational
Mode
The operational status of MLD on the interface.
MLD Version This field indicates the version of MLD configured on the
interface.
Query Interval This field indicates the configured query interval for the
interface.
Query Max
Response Time
This field indicates the configured maximum query response
time (in seconds) advertised in MLD queries on this interface.
Robustness This field displays the configured value for the tuning for the
expected packet loss on a subnet attached to the interface.
Startup Query
Interval
This value indicates the configured interval between General
Queries sent by a Querier on startup.
Startup Query
Count
This value indicates the configured number of Queries sent out
on startup, separated by the Startup Query Interval.