Users Guide

Dell EMC Networking CLI 108
DHCP L2 Relay
isdp advertise-v2 Enables the sending of ISDP version 2 packets
from the device.
GC
isdp enable Enables ISDP on the switch. GC or
IC
isdp holdtime Configures the hold time for ISDP packets that
the switch transmits.
GC
isdp timer Sets period of time between sending new ISDP
packets.
GC
show isdp Displays global ISDP settings. PE
show isdp entry Displays ISDP entries. PE
show isdp interface Displays ISDP settings for the specified
interface.
PE
show isdp neighbors Displays the list of neighboring devices. PE
show isdp traffic Displays ISDP statistics. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
dhcp l2relay (Global
Configuration)
Enables the Layer 2 DHCP Relay agent for an
interface or globally.
GC or
IC
dhcp l2relay (Interface
Configuration)
Enables DHCP L2 Relay for an interface. IC
dhcp l2relay circuit-id Enables user to set the DHCP Option 82
Circuit ID for a VLAN.
GC
dhcp l2relay remote-id Enables user to set the DHCP Option 82
Remote ID for a VLAN.
GC
dhcp l2relay trust Configures an interface to trust a received
DHCP Option 82.
IC
dhcp l2relay vlan Enables the L2 DHCP Relay agent for a set of
VLANs.
GC
Command Description Mode
a