White Papers

48 Using MLAG in Dell Networking N-Series Switches | version 1.5
configure
interface gigabit 1/0/1
switchport access vlan 100
voice vlan 100
voice vlan auth disable
interface range gigabit 1/0/2-24
switchport mode general
switchport general pvid 200
switchport general allow vlan add
100 tagged
switchport general allow vlan add
200
voice vlan 100
voice vlan auth disable
exit
configure
interface range gigabit 1/0/1-24
switchport mode general
switchport general pvid 200
switchport general allow vlan add
100 tagged
switchport general allow vlan add
200
voice vlan 100
voice vlan auth disable
exit
Voice VLAN and QoS configuration for N3024P-1 and N3024P-2
Notes:
1. The purpose of this section is to show how to configure QoS for VoIP on the N-Series switches.
See the Cisco Nexus 5672UP User Guide for instructions on configuring the corresponding QoS parameters
for VoIP prioritization on the Nexus 5672UP.
2. See the appendix section A.5 for the commands required to validate the configuration and to ensure that
MLAG and the VoIP features work properly.