White Papers

45 Using MLAG in Dell Networking N-Series Switches | version 1.5
Assign interfaces to the port channel and enable
LACP.
Assign interfaces to the port channel and
enable LACP.
configure
interface range fo1/1/1-2
description MLAG_Peer_Link
switchport mode trunk
channel-group 55 mode active
end
configure
interface range fo1/1/1-2
description MLAG_Peer_Link
switchport mode trunk
channel-group 55 mode active
end
Configure the MLAG going to the Nexus 5672UP
switch.
Create the port channel.
Configure the port channel for dot1q trunking.
Specify the MLAG ID.
Configure the MLAG going to the Nexus
5672UP switch.
Create the port channel.
Configure the port channel for dot1q
trunking. Specify the MLAG ID.
configure
interface port-channel 10
description MLAG_to_Nexus_5672UP-1
switchport mode trunk
vpc 10
end
configure
interface port-channel 10
description
MLAG_to_Nexus_5672UP-1
switchport mode trunk
vpc 10
end
Assign interfaces to the port channel and enable
LACP.
Assign interfaces to the port channel and
enable LACP.
configure
interface te1/0/3
description te1/0/3_to_Nexus_5672UP-1
switchport mode trunk
channel-group 10 mode active
end
configure
interface te1/0/3
description
te1/0/3_to_Nexus_5672UP-1
switchport mode trunk
channel-group 10 mode active
end
Configure the MLAG going to the N3024P-1 switch.
Create the port channel.
Configure the port channel for dot1q trunking.
Specify the MLAG ID.
Configure the MLAG going to the N3024P-1
switch.
Create the port channel.
Configure the port channel for dot1q
trunking. Specify the MLAG ID.
configure
interface port-channel 20
description MLAG_to_N3024P-1
switchport mode trunk
vpc 20
end
configure
interface port-channel 20
description MLAG_to_N3024P-1
switchport mode trunk
vpc 20
end
Assign interfaces to the port channel and enable
LACP.
Assign interfaces to the port channel and
enable LACP.