White Papers

40 Using MLAG in Dell Networking N-Series Switches | version 1.5
N1524P-1
Configure the port channel connecting to the
upstream MLAG peer switches.
configure
interface port-channel 13
description gi1/0/13-
14_to_N2048_MLAG_Peers
switchport access vlan 10
interface range gi1/0/13-14
description te1/0/13-
14_to_N2048_MLAG_Peers
channel-group 13 mode active
end
Configure the port channel connecting to the
upstream MLAG peer switches.
configure
interface port-channel 13
description gi1/0/13-
14_to_N2048_MLAG_Peers
switchport access vlan 10
interface range gi1/0/13-14
description te1/0/13-
14_to_N2048_MLAG_Peers
channel-group 13 mode active
end
LAG configuration for N1524P-1
Note: See appendix section A.4 for configuration validation commands and commands to ensure that MLAG and
VRRP are working. Configurations for N2048-3 and N2048-4 resemble configurations for N2048-1 and N2048-2
except different VLAN. Also Layer-3 configuration for VLAN 30 is not shown as it varies based on the
device/configuration used in Layer-3