White Papers

14 Using MLAG in Dell Networking N-Series Switches | version 1.5
Identify and configure the peer link interface
-peer link requires a native
VLAN (i.e. VLAN 1 or other
VLAN made native)
Identify and configure the peer link interface
-peer link requires a native
VLAN (i.e. VLAN 1 or other
VLAN made native)
configure
interface tengigabitethernet 1/0/1
channel-group 1 mode active
description MLAG_peer_link
end
configure
interface tengigabitethernet 1/0/1
channel-group 1 mode active
description MLAG_peer_link
end
Create a LAG for partner switch N3048-3 to
pass traffic.
Assign a unique id for partner N3048-3.
Create a LAG for partner switch N3048-3 to
pass traffic.
Assign a unique id for partner N3048-3.
configure
interface port-channel 30
switchport mode trunk
vpc 30
end
configure
interface port-channel 30
switchport mode trunk
vpc 30
end
Create a LAG for partner switch N3048-4 to
pass traffic.
Assign a unique id for partner N3048-4.
Create a LAG for partner switch N3048-4 to
pass traffic.
Assign a unique id for partner N3048-4.
configure
interface port-channel 40
switchport mode trunk
vpc 40
end
configure
interface port-channel 40
switchport mode trunk
vpc 40
end
Assign interfaces to connect to partner switch
N3048-3 LAG.
Assign interfaces to connect to partner switch
N3048-3 LAG.
configure
interface gigabitethernet 1/0/47
channel-group 30 mode active
description MLAG_Partner_link
end
configure
interface gigabitethernet 1/0/11
channel-group 30 mode active
description MLAG_Partner_link
end
Assign interfaces to connect to partner switch
N3048-4 LAG.
Assign interfaces to connect to partner switch
N3048-4 LAG.
configure
interface gigabitethernet 1/0/48
channel-group 40 mode active
description MLAG_Partner_link
end
configure
interface gigabitethernet 1/0/12
channel-group 40 mode active
description MLAG_Partner_link
end
Enable the MLAG. Enable the MLAG.