Setup Guide

28 入門指南
Step 5:
Finally, set up the default gateway. Please enter the
IP address of the gateway from which this network is
reachable. [0.0.0.0]: 10.1.1.1
This is the configuration information that has been
collected:
SNMP Interface = “public”@10.1.2.100
User Account setup = admin
Password = ********
VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0
Default Gateway = 10.1.1.1
Step 6:
If the information is correct, please enter (Y) to
save the configuration and copy the settings to the
start-up configuration file. If the information is
incorrect, enter (N) to discard the configuration and
restart the wizard: [Y/N] y
Thank you for using the Dell Easy Setup Wizard. You
will now enter CLI mode.
Applying Interface configuration, please wait...
下⼀步
在完成上述的初始設定後，將前面板交換器連接埠連接至頻內遠端管理的
生產網路。
若為 VLAN1 管理介面 IP 位址指定 DHCP，介面將從網路的 DHCP 伺服
器上取得 IP 位址。為了尋找動態指派 IP 位址，請使用主控台連接埠連接
裝置發出下列命令：
•針對 VLAN 1 路由介面，輸入 show ip interface ( 顯示介面 ) 。