Setup Guide

24 使用入门指南
注：如果已配置，默认访问级别将设置为 SNMP 管理接口的最高可用访问
级别。最初将仅激活 SNMPv2。 SNMPv3 将一直禁用，直至您返回来配置
SNMPv3 的安全访问级别 （例如引擎 ID、视图等）。
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station.[0.0.0.0]: 10.1.2.100
Step 2:
Now we need to set up your initial privilege (Level
15) user account.This account is used to login to the
CLI and Web interface.You may set up other accounts
and change privilege levels later.For more information
on setting up user accounts and changing privilege
levels, see the user documentation.
To set up a user account:
Please enter the user name.[root]:admin
Please enter the user password: ********
Please reenter the user password: ********
Step 3:
Next, an IP address is set up on the VLAN 1 routing
interface.
You can use the IP address to access the CLI, Web
interface, or SNMP interface of the switch.
To access the switch through any Management Interface
you can
. Set up the IP address for the Management Interface.
. Set up the default gateway if IP address is
manually configured on the routing interface.
Step 4:
Would you like to set up the VLAN1 routing interface
now? [Y/N] y
Please enter the IP address of the device (A.B.C.D) or
enter “DHCP” (without the quotes) to automatically
request an IP address from the network DHCP server:
10.1.1.200