Setup Guide

使用入门指南 21
• 网络管理系统已配置。在管理站中，您可以访问 SNMP、HTTP 和
CLI 接口。您还可以通过选择 (0.0.0.0) IP 地址使所有 IP 地址可以访
问这些管理接口。
•已配置 VLAN 1 路由接口的 IP 地址。
• 已配置默认网关地址。
注：在以下示例中，可用的用户选项或默认值位于大括号 [] 中。在未选定
选项的情况下按下 <Enter> 键，将接受默认值。帮助文本位于圆括号中。
戴尔轻松设置向导控制台示例
以下示例包含与使用上文所列的输入值运行示戴尔轻松设置向导会话相关
联的提示和响应顺序。
在交换机完成 POST 和引导后，将显示以下对话框：
Unit 1 - Waiting to select management unit)>
___________Dell SupportAssist EULA__________________
I accept the terms of the license agreement.You can
reject the license agreement by configuring this
command 'eula-consent support-assist reject'.
By installing SupportAssist, you allow Dell to save
your contact information (e.g. name, phone number
and/or email address) which would be used to provide
technical support for your Dell products and services
Dell may use the information for providing
recommendations to improve your IT
infrastructure.Dell SupportAssist also collects and
stores machine diagnostic information, which may
include but is not limited to configuration
information, user supplied contact information, names
of data volumes, IP addresses, access control lists,
diagnostics & performance information, network
configuration information, host/server configuration
& performance information and related data (Collected
Data) and transmits this information to Dell.By
downloading SupportAssist and agreeing to be bound by
these terms and the Dell end user license agreement,