Users Guide

VLANs 803
MLAG with RPVST and Voice VLAN
Figure 21-26 describes the reference topology. It is presumed that a call
manager of some type is connected to the network in the voice VLAN.
Figure 21-26. Network Topology for LAG with RPVST and Voice VLAN
MLAG Primary Peer Configuration
1 Configure the MLAG primary switch.
Keepalives are disabled on the peer links (optional). The four peer-links are
placed in port-channel 3. Port-channel 1 is the northbound (partner 1)
MLAG interface in VPC 1 and port-channel 4 is the southbound (partner
2) interface in VPC 4. Finally, VPC is enabled and the VPC domain is set
to 1.
console#config
console(config)#interface Te1/0/1
