Users Guide

Access Control Lists 705
Renaming or Removing IPv6 ACLs
To rename or delete an IPv6 ACL:
1
From the IPv6 ACL Name menu on the IPv6 ACL Configuration page,
select the ACL to rename or remove.
a To rename the ACL, select the Rename checkbox and enter a new
name in the associated field
b To delete the ACL, select the Remove checkbox.
2 Click Apply .
Viewing IPv6 ACLs
To view configured ACLs, click Show All from the IPv6 ACL Configuration
page. The IPv6 ACL Table page displays.
Figure 20-11. Show IPv6 ACL
IPv6 ACL Rule Configuration
Use the IPv6 ACL Rule Configuration page to define rules for IPv6-based
ACLs. The access list definition includes rules that specify whether traffic
matching the criteria is forwarded normally or discarded. Additionally, rules
can specify to assign traffic to a particular queue, filter on some traffic,
change VLAN tag, and/or redirect the traffic to a particular port. By default,
no specific value is in effect for any of the IPv6 ACL rules.
There is an implicit deny all rule at the end of an ACL list. This means that if
an ACL is applied to a packet and if none of the explicit rules match, then the
final implicit deny all rule applies and the packet is dropped.