Users Guide

Access Control Lists 697
Locally Generated Packets
Policy-Based Routing does not affect locally generated packets, i.e. packets
generated by protocols running on the switch.
Configuring ACLs (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring ACLs on Dell EMC
Networking N1100-ON, N1500, N2000, N2100-ON, N3000, N3100-ON, and
N4000 Series switches. For details about the fields on a page, click at the
top of the Dell EMC OpenManage Switch Administrator web page.
IP ACL Configuration
Use the IP ACL Configuration page to add or remove IP-based ACLs.
To display the IP ACL Configuration page, click Switching
 Network
Security
 Access Control Lists  IP Access Control Lists 
Configuration in the navigation panel.
Figure 20-1. IP ACL Configuration
Adding an IPv4 ACL
To add an IPv4 ACL:
1
Open the IP ACL Configuration page.
2 Click Add to display the Add IP ACL page.
3 Specify an ACL name.