Users Guide

516 Images and File Management
N3000 Dual Images
The Dell EMC Networking N3000 Series switches support two image types.
Each image type has a distinct set of features intended to optimize the switch
resources for the intended purpose. For each image type, the user interface
has been optimized to eliminate access to the omitted features.
When changing roles, the configuration for the preceding role will show an
error during switch reboot. The unsupported configuration lines are not
placed into the running-config, and a message showing the unsupported
configuration lines is shown. It is recommended that the startup-config be
removed or modified prior to rebooting when changing roles.
Access Router/Switch Role
Standard naming format: N3000_N2000vA.B.C.D.stk.
This image operates on both Dell EMC Networking N3000/N2000 Series
switches and should be the only image downloaded to the N2000 and selected
N3000 Series switches.
Table 14-2 shows the feature set differences for this image (features not
shown are included in the image). This image is the default image present on
switches shipped from the factory.
Table 14-2. Features Included/Excluded in Access Router/Switch Image
Includes Excludes
iSCSI
BGP
DVLAN
MVR
MLAG
GARP
Auto-VoIP
Web interface for all features