Users Guide

Monitoring and Logging System Information 425
4 Verify the remote log server configuration.
console#show syslog-servers
IP/IPv6 Address/Hostname Port Severity Description
------------------------ ---- ---------- ------------
192.168.2.10 514 debugging Syslog Server
Transport Type Authentication Certificate Index
-------------- ----------------- -------------------
UDP
5 Verify the local logging configuration and view the log messages stored in
the buffer (RAM log).
console#show logging
Logging is enabled
Logging protocol version: 0
Source Interface............................... Default
Console Logging: Level warnings. Messages : 4 logged, 379
ignored
Monitor Logging: disabled
Buffer Logging: Level informational. Messages : 139 logged, 244
ignored
File Logging: Level emergencies. Messages : 0 logged, 383
ignored
Switch Auditing : enabled
CLI Command Logging: disabled
Web Session Logging : disabled
SNMP Set Command Logging : disabled
Logging facility level : local7
Syslog Server Details:
192.168.2.10 : Level informational. Messages : 0 dropped
0 Messages dropped due to lack of resources
Buffer Log:
<190> Mar 8 04:13:15 dhcp-10-27-32-51-1 CLI_WEB[emWeb]:
cmd_logger_api.c(260) 383 %% [CLI::EIA-232] User logged in to
enable mode.
<189> Mar 8 04:13:15 dhcp-10-27-32-51-1 TRAPMGR[trapTask]:
traputil.c(721) 382 %% Session 0 of type 1 started for user
connected from EIA-232.
<190> Mar 7 21:58:14 dhcp-10-27-32-51-1 CLI_WEB[UtilTask]:
cmd_logger_api.c(260) 381 %% [CLI::EIA-232] Disconnected due
to Idle Timeout
--More-- or (q)uit