Users Guide

160 Hardware Overview
Dell EMC Networking N3100-ON Series Switch
Hardware
Front Panel
All N3132PX-ON models are 1U, rack-mountable switches. The N3132PX-
ON front panel provides twenty-four 10/100/1000BASE-T Ethernet RJ-45
ports and eight 100/1000/2500/5000BASE-T Ethernet RJ-45 ports that
support auto-negotiation for speed, flow control, and duplex. The N3132PX-
ON switch front panel ports operate in full duplex mode only. N3132PX-ON
front panel copper ports support PoE 60W capability. The N3132PX-ON
models support four SFP+ 10G ports. One RJ-45 console port provides serial
communication capabilities, which allows communication using RS-232
protocol. The front panel has a Type-A USB port for storage.
The following image shows the front panel of the Dell EMC Networking
N3132PX-ON switch.
Figure 3-24. Dell EMC Networking N3132PX-ON with 24 10/100/1000BASE-T Ports
(Front Panel)
The Dell N3132PX-ON switch is capable of loading an OS via the ONIE boot
loader, therefore the port numbering on the front panel labels is consecutive,
per the ONIE requirements, regardless of port type.
24 10/100/1000BASE-T Ports
8 100/1000/2500/5000BASE-T
Ports
SFP+
Ports
USB Port
Console Port
Out-of-Band
Management
Port