Users Guide

1518 Differentiated Services
Simple DiffServ Policy Attributes Configuration
Beginning in Privilege Exec mode, use the following commands to configure
policy attributes and view related information. Information regarding
configuration of single-rate three color meters (srTCM) and two-rate three
color meters (trTCM) can be found in "WRED" on page 1549.
CLI Command Description
configure Enter global configuration mode.
policy-map
policy-map-name Enter Policy Map Configuration mode for the
specified policy.
class class-name Create an instance of a class definition within the
specified policy for the purpose of defining
treatment of the traffic class through subsequent
policy attribute statements. Also enters Policy-
Class-Map Configuration mode for the policy-class-
map instance.
assign-queue
queue-id Modify the queue ID (range: 0–6) to which the
associated traffic stream is assigned.