Users Guide

1494 DHCPv6 Server Settings
Monitoring DHCPv6 Information
Use the following commands to view bindings, and statistics, and to clear the
information.
ipv6 dhcp server pool-
name
[rapid-commit]
[preference pref-value ]
Configure DHCPv6 server functionality on the interface.
• pool-name — The name of the DHCPv6 pool containing
stateless and/or prefix delegation parameters
•
rapid-commit — Is an option that allows for an
abbreviated exchange between the client and server.
•
pref-value — Preference value — used by clients to
determine preference between multiple DHCPv6 servers.
(Range: 0-4294967295)
CTRL + Z Exit to Privileged Exec Mode.
show ipv6 dhcp interface
[tunnel tunnel-id | vlan
vlan-id ]
View DHCPv6 information for all interfaces or for the
specified interface.
Command Purpose
show ipv6 dhcp binding
[ address ]
View the current binding information in the DHCP server
database. Specify the IP address to view a specific binding.
show ipv6 dhcp statistics View DHCPv6 server and relay agent statistics.
clear ipv6 dhcp statistics Reset all DHCPv6 server and relay agent statistics to zero.
Command Purpose