Setup Guide
Table Of Contents
- Pendahuluan
- Pemasangan N1108T-ON/N1108P- ON/N1108EP-ON
- Pemasangan N1124T-ON/N1124P-ON/ N1148T-ON/ N1148P-ON
- Memulai dan Mengonfigurasi Switch Seri N1100-ON
- Kepatuhan agensi
- Ketinggian Pengoperasian– Pembaruan Informasi
28 Panduan Cara Memulai
Step 5:
Finally, set up the default gateway. Please enter the
IP address of the gateway from which this network is
reachable. [0.0.0.0]: 10.1.1.1
This is the configuration information that has been
collected:
SNMP Interface = “public”@10.1.2.100
User Account setup = admin
Password = ********
VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0
Default Gateway = 10.1.1.1
Step 6:
If the information is correct, please enter (Y) to
save the configuration and copy the settings to the
start-up configuration file. If the information is
incorrect, enter (N) to discard the configuration and
restart the wizard: [Y/N] y
Thank you for using the Dell Easy Setup Wizard. You
will now enter CLI mode.
Applying Interface configuration, please wait...