Setup Guide

26הדובעה תליחת ךירדמ
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y
Step 1:
The system is not set up for SNMP management by
default. To manage the switch using SNMP (required
for Dell Network Manager) you can
Set up the initial SNMP version 2 account now. .
Return later and set up other SNMP accounts. (For.
more information on setting up an SNMP version 1
or 3 account, see the user documentation).
Would you like to set up the SNMP management interface
now? [Y/N] y
To set up the SNMP management account you must specify
the management system IP address and the “community
string” or password that the particular management
system uses to access the switch. The wizard
automatically assigns the highest access level
[Privilege Level 15] to this account. You can use
Dell Network Manager or other management interfaces to
change this setting, and to add additional management
system information later. For more information on
adding management systems, see the user
documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: public
:הרעה השיגל תרדגומ לדחמה תרירבכ הרדגוהש השיגה תמר ,הרוצתה הרדגוה םא
לוהינה קשממ רובע הנימזה רתויב ההובגהSNMP קר הלחתהב .SNMPv2 .לעפוי
SNMPv3 רובע החטבאה תשיג תרוצת תא רידגהל רוזחתש דע תבשומ SNMPv3
.(המודכו הגוצת ,עונמ ההזמ ,רמולכ)
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station. [0.0.0.0]: 10.1.2.100